Tel:+86-(0)318-7565161 Email: sales@wiremesh-jdx.com
Jane Peng
EN 10223-3 is standard of wire and wire products for fences--part 3 hexagonal steel wire netting for engneering purpose.Table 1 is gabion mesh sizes and wire sizes and tolerances.
Mesh sizes and wire sizes and tolerances
|
Mesh |
Wire |
Typical roll widths mm | ||
|
Size mm |
Size tolerance % |
Diameter of zinc or zinc alloy coated wire mm |
Diameter tolerances of zinc or zinc alloy coated wire | |
|
50 50 50 |
+16 -4 |
2.0 2.2 2.4 |
+/-0.05 +/-0.06 +/-0.06 |
1000 2000 3000 4000 |
|
60 60 60 60 |
+16 -4 |
2.0 2.2 2.4 2.7 |
+/-0.05 +/-0.06 +/-0.06 +/-0.06 | |
|
80 80 80 |
+16 -4 |
2.0 2.2 2.4 2.7 3.0 |
+/-0.05 +/-0.06 +/-0.06 +/-0.06 +/-0.07 | |
|
100 100 100 |
+16 -4 |
2.7 3.0 3.4 |
+/-0.06 +/-0.07 +/-0.07 | |
|
1) In accordance with T1 of EN 10218-2. 2) Other roll widths by agreement. | ||||
Jane Peng Genny Yang EN 10223-3 is standard of wire and wire products for fences--part 3 hexagonal steel wire netting for engneering purpose.Table 1 is gabion mesh sizes and wire sizes and tolerances.
Mesh sizes and wire sizes and tolerances
|
Mesh |
Wire |
Typical roll widths mm | ||
|
Size mm |
Size tolerance % |
Diameter of zinc or zinc alloy coated wire mm |
Diameter tolerances of zinc or zinc alloy coated wire | |
|
50 50 50 |
+16 -4 |
2.0 2.2 2.4 |
+/-0.05 +/-0.06 +/-0.06 |
1000 2000 3000 4000 |
|
60 60 60 60 |
+16 -4 |
2.0 2.2 2.4 2.7 |
+/-0.05 +/-0.06 +/-0.06 +/-0.06 | |
|
80 80 80 |
+16 -4 |
2.0 2.2 2.4 2.7 3.0 |
+/-0.05 +/-0.06 +/-0.06 +/-0.06 +/-0.07 | |
|
100 100 100 |
+16 -4 |
2.7 3.0 3.4 |
+/-0.06 +/-0.07 +/-0.07 | |
|
1) In accordance with T1 of EN 10218-2. 2) Other roll widths by agreement. | ||||